Dynapac PL2000S, Operating Instructions Manual

Page: 129 / 228

D 69
D PL2
000.
G
B
69
-168
-
1
0
.0
1
Warnings for hydraulic and
water circuits
These warnings appear on
screen automatically and in-
dicate which fault has oc-
curred.
The graphics (1) indicate the
type of fault.
The numeral (2) identifies a
given screen and should be
quoted to Technical Service
with any queries to enable the
problem to be located more
rapidly.
- This message can be cleared from screen by pressing button (F8).
This returns the user to the previous screen.
$
The message screens are not displayed again (cyclical fashion) once the (F8) button
has been pressed. The message is not displayed again until the next time the ma-
chine is started.
Key to component and status symbols
Designation Symbol Action
Hydraulic oil temperature
Allow the hydraulic oil to cool
down.
Check the hydraulic oil level.
Check radiator for signs of con-
tamination.
Hydraulic oil level
Top up hydraulic oil.
If necessary, carry out a visual
inspection for signs of leakage.
Hydraulic filter
(pressure filter)
Replacing filter elements
Hydraulic filter
(return flow filter)
Replacing filter element
Water filter Replacing filter element
Terminal2.Tif/ 3290086.jpg
1
2