Dynapac PL2000S, Operating Instructions Manual

Page: 14 / 228

B 4
B PL
2000.
G
B
4-
34
-
10.
01
2.1 Vehicle
Assembly
Frame and assembly: Robust, distortion-resistant steel welded design with useful
brackets for supporting the assemblies, units, attachments and tanks. All parts can
be easily accessed for maintenance and repair work.
Operator’s control station: The continuous length of accessible operator’s control
station is located in the central part of the machine and can be reached via two lad-
ders. Two ergonomic seats ensure that the planer can be conveniently operated from
both sides and that the operator has a good overview of and can monitor the milling
process.
The cold planer can be fitted with a weather protecting sun roof (can be folded in) and
all-round panels as an option. During transportation, the roof can be mechanically or
hydraulically folded forwards and fixed on the water tank.
Controls at operator’s control station: An operating panel, the position and height
of which can be easily adjusted, can be locked on the right and left and contains all
operating and control elements required. If necessary, the machine operator can
move this into any other position required, even beyond the edge of the machine. The
securely arranged controls are obviously marked for all applications.
Steering and feed are simultaneously controlled using a drive lever, designed as a
joystick. A second joystick controls the position of the upper conveyor and its speed
(controlled in a gradual manner).
A LC display integrated in the operating panel rapidly and comprehensively informs
the machinist of the present operating modes as well as any setting and
maintenance work required on the machine. All machine settings, including the grad-
ing depth and slope control, can be simply programmed and modified by means of a
perforated keypad with internationally comprehensible symbols.
Space has been left for the installation of a monitor for observing the planer track and
the dead space. This equipment is optionally available and can be installed with four
video cameras.
The main control panel, the lower control panels and access to all important switching
and connection points can be sealed off.