Dynapac PL2000S, Operating Instructions Manual

Page: 21 / 228

B 11
B PL
2000.
G
B
1
1
-34
-
10.
01
Optional equipment:
- Extended levelling equipment: a transverse slope sensor, a digital rotary arm sen-
sor, the ultrasound Sonic-Ski and laser receivers are contained in this package. In
addition to this, a Roadscanner System can be used in conjunction with a trans-
verse slope sensor.
- Fine spaced milling drum: cutting width 2010 mm, with welded on lug boxes which
can be positioned, line spacing 7.5 mm
- Cutting section for 2100 mm cutting width with normal or fine spaced milling drum,
- Upper conveyor with folding option: can be mechanically folded in downwards
- Weather protecting sun roof: can be mechanically or hydraulically lowered, with all-
round weather protecting panel (can be folded in) and electrical windscreen wiper.
- Additional operating panel: for the machine to be operated from both sides of the
operator’s control station at the same time.
- Video control system: monitor and four video cameras for observing the cutting
track area in front of the front drive unit, the sliding shoe area in front of the milling
drum housing, the scraper flap area behind the milling drum housing and the area
of the rear operating track during reverse travel. If necessary, the cameras can be
swivelled and fitted differently so that the cold planer can also be steered by the ma-
chine operator by means of this video system if necessary.
- Emergency operating equipment: can be used if the main operating panel fails
- Dust suction system: extraction and filtering of dusts and harmful vapours in the fol-
lowing areas: cutting section, material transfer point between the lower and upper
conveyor and discharge area on upper conveyor
- Water refilling pump by means of auto-suction recirculating pump driven by hydrau-
lic motor, displacement quantity approx. 18m
3
/h
- High pressure cleaner: water lance with approx. 13 m hosing, tube reeling device,
operating pressure 130 bar, water consumption approx. 38 l/min
- Pneumatic cutting tool driver: cutting tool set in toolbox, working pressure 6.3 bar,
air consumption approx. 460 l/min, number of impacts 3000 p/min.
- Pneumatic piledriver: socket wrench set and extension in toolbox, working pressure
6.3 bar, air consumption approx. 580 l/min, torque 640 Nm.
- Compressed air pistol: for precision cleaning of areas difficult to access,
working pressure can be adjusted between 2 -10 bar.
- Pneumatic grease press: with flexible compressed air hose, working pressure max.
8 bar, compression 480 bar (60:1)
- Spiral compressed air line: 10m in length for connecting compressed air tools
Other useful extensions and attachments are available on request.