Dynapac PL2000S, Operating Instructions Manual

Page: 173 / 228

D 113
D PL2
000.
G
B
1
1
3
-168
-
10
.0
1
Plumbline fixture
A removable plumbline fixture can be
found on both front drive units.
The plumbline fixture can be used to
work along one particular longitudinal
mark which is at a specified distance
from the machine.
The machine should then be controlled
ensuring that the suspended plumbline
(1) is above the mark.
- To set the distance to the mark, unfas-
ten wing screw (2), move the pipe into
the position required and re-tighten
the wing screw correctly.
- To remove the plumbline fixtures, unfasten wing screw (3) and pull the fixture out
of the bracket.
- If the plumbline fixture is not used for some time, the chain can be used to hang the
plumbline in the bracket (4).
12Peil~1.tif
1
2
4
3