Dynapac PL2000S, Operating Instructions Manual

Page: 170 / 228

D 110
D PL2
000.
G
B
1
1
0
-168
-
10
.0
1
Monitoring camera (
&
)
Four video cameras are fitted to the ma-
chine to observe the area of the milling
track in front of the front drive unit, the
area of the sliding shoe in front of the
milling drum housing, the area of the
scraper flap behind the milling drum
housing and the area of the rear track
during reverse.
If necessary, the cameras can be swiv-
elled and individually set up.
- To swivel around axis (A), swivel the
camera in the bracket up or down.
- To swivel around axis (B), unfasten
the screws (1), swivel camera bracket
and camera into the position required and re-tighten screws (1) correctly.
148aka~1.tif
A
B
1