Dynapac PL2000S, Operating Instructions Manual

Page: 77 / 228

D 17
D PL2
000.
G
B
17
-168
-
1
0
.0
1
Pos. Designation Short description
14
Control lever
Travel drive
Dual-axis control lever for controlling the traction.
Steering is transmitted electrohydraulically.
-
Swivel direction left: the machine is steered to
the left via the front axle when steering mode is
deactivated and by both axles when cornering
mode, crab steering and straight-ahead are
defined.
- Swivel direction right: Turns the vehicle to the
right
- Swivel direction forwards: Drives the vehicle
forwards direction.
- Swivel direction backwards: Drives the vehicle in
reverse direction. During this steering movement,
the milling drum drive is disengaged.
Travel drive steering movements can be per-
formed in all control lever positions even in ze-
ro position.
Forwards and reverse travel is only possible
when swivelling the control lever if the slide
switch was previously moved out of its neutral
position (sensing signal).
$
Vehicle speed is proportional to the angle of
the control lever. Large angle = higher speed.
Complete extension means max. pre-selected
speed.
When reversing, an acoustic signal sounds.
If the vehicle is fitted with the optional video
system, the reverse travel camera is automat-
ically engaged.
Ensure that no-one is standing in the danger
area.