Dynapac PL2000S, Operating Instructions Manual

Page: 169 / 228

D 109
D PL2
000.
G
B
10
9-
16
8 -
10.
0
1
Scraper flap throttle valves
Throttles for setting the volumetric flow
can be found on the hydraulic cylinders
of the scraper flap.
If the scraper flap is not raised smoothly,
the extension and/or insertion speed of
the appropriate cylinder can be
changed.
- Use the adjusting wheel to turn the
throttle until the scraper rises and low-
ers smoothly.
- Turn to the right = greater volumetric
flow, higher speed
Turn to the left = smaller volumetric
flow, lower speed.
"Upper conveyor function change-
over" valve
The valve for changing over between
upper conveyor in operating position /
upper conveyor in floating position func-
tion can be found on the left-hand side of
the machine, in the front section of the
inside of the frame.
- Switch position (1): upper conveyor in
operating position.
- Switch position (2): upper conveyor in
floating position (transport position)
Switch position (1) is for the working site
and should be selected for transport tasks during which the upper conveyor is rigidly
placed on the trailer, i.e. no swivel movements.
Switch position (2) should be selected for transport tasks during which the upper con-
veyor is flexibly mounted, e.g. placed on a support fixture on the tractor machine of
the trailer.
10Dros~1.tif
503ven~1.tif
1 2