Dynapac PL2000S, Operating Instructions Manual

Page: 99 / 228

D 39
D PL2
000.
G
B
39
-168
-
1
0
.0
1
The basics of terminal operation
The graphics displayed
above each of the function
keys symbolise the screen
into which each keystroke is
about to take you, or which
command is being executed
at that time.
If a function mask has + (F4)
and - (F5) signs, these keys
can be used to alter a value in
specified steps. One adjust-
ment step per keystroke. If
the cursor panel can be al-
tered using the PgUp and
PgDn keys, continuous ad-
justment is possible by hold-
ing down either of these keys.
The value desired can also
be entered via the numerical
keypad.
If various different compo-
nents and/or adjustment op-
tions can be selected in a given screen, the component or selected function will start
to flash.
To save changed values, press the function key (F8) bearing the same symbol as the
diskette or press the Enter key.
If the amended value is not being adopted, press the function key (F1) belonging to
the scored out diskette.
After either of these operations, or after pressing the Esc key, the system returns you
to the main menu.
Terminal2.Tif/Mainmask1.jpg
Terminal2.Tif/Convmask2.jpg