Dynapac PL2000S, Operating Instructions Manual

Page: 210 / 228

D 150
D PL2
000.
G
B
15
0-
16
8 -
10.
0
1
In addition to the tasks listed in the checklist, a visual check should be conducted of
all components, equipment, functions.
Note the condition, fastening and wear of individual elements, completeness and
wear of milling tools as well as checking for specified settings, seal integrity and lu-
brication!
Grab bars
Check with engine running:
Grab bars can be connected with detent
pins when the side shield is raised.
Grab bars automatically release them-
selves from the detent pins when the
downwards button is pressed.
Sliding shoe
Check with engine running:
-
Smooth extension and retraction at
touch of a button with full pressure
- Smooth extension in floating
position at touch of a button.
Scraper
Check with engine running:
-
Smooth extension and retraction at
touch of a button with full pressure
- Smooth extension in floating
position at touch of a button.
Upper conveyor
Check with engine running:
Belt tension,
forwards and reversing mode,
smooth raising, lowering, swivelling.
Lower conveyor
Check with engine running:
Belt tension,
forwards and reversing mode
Safety device
Fastening, check condition and func-
tion.
Water system
Check:
-
Function of spray nozzles.
Weather protecting sun roof
Check:
-
Raising and lowering
- Interlock
- Condition of roof and all-round
panels.
Other equipment:
- Engine panels
- Lateral flaps
Check that panels and flaps are secure.
Check! How?