Dynapac PL2000S, Operating Instructions Manual

Page: 15 / 228

B 5
B PL
2000.
G
B
5-
34
-
10.
01
Lower control panels: The operating panels housed here are located on neither
side of the planer, in front of and behind the milling roller box. They contain duplicates
of the main controls of the operator’s control station with override functions so that the
milling process can be monitored, corrected and interrupted from this point.
One digital controller for the grading depth and one for the slope position are attached
next to the rear operating panels on the left and right sides.
Dynapac CAN-BUS data communication system: The tried and tested state-of-
the-art electronic PLC (Programmable Logic Control) monitors all control functions of
the cold planer. Signals processed by microprocessors are safely transferred by an
efficient CAN-BUS system (Data Information System) and displayed as information
on the LC display. Possible function deviations and errors are noted and can be cor-
rected immediately.
Engine: The machine is fitted with an efficient 6-cylinder Cummins turbodiesel en-
gine which with its 600 bhp easily covers the rating of the large planer. This engine
has electronic engine management which also automatically adapts it to the extreme
operating and environmental conditions and therefore keeps its torque stable. Com-
pliance is maintained with emission values as defined in the U.S. EPA exhaust stan-
dard and the European COM2 exhaust standard. The engine cover is noise-insulated
as standard so that operating staff and the surrounding area are subjected to mini-
mum levels of noise.