Dynapac PL2000S, Operating Instructions Manual

Page: 58 / 228

C 14
C PL2
000.
D 14
-1
6
-
10
.0
1
7 Loading by crane
In the event of breakdown, should it no longer be possible for the machine to be towed
or if it cannot be loaded in any other way, there is also the possibility of raising it by
crane.
$
Use lifting tackle with sufficient load bearing capacity.
(For weights and dimensions, refer to Chapter B). Ensure that the steel cables,
shackles and crosshead are large enough.
Four attachment points (1,2) are provided on the machine frame for loading the vehi-
cle using lifting gear.
- Secure vehicle wherever it is parked up.
- Move upper conveyor into operating position.
- Weather protecting sun roof may be deployed.
- Safely store loose components and accessories, such as removable spotlights or
levelling equipment parts.
- Attach lifting gear to the four attachment points (1, 2).
$
During transport, ensure that the machine is always horizontal!
Ensure that there is nobody in the danger area.
$
Risk of accident! When loading by
crane, the swivel hydraulics of the upper
conveyor must always be moved into
their operating position (1) because oth-
erwise the machine may e.g. swivel out-
wards accidentally if on a slight incline.
Pl2000new.cdr
2
1
503ven~1.tif
1