DPMS XPQ, User Manual, Page: 56 / 134

54
DPMS XPQ User Manual
Voltage Eligibility Parameter Setting
Pressing H and P simultaneously under the metering data display mode
will enter the voltage eligibility statistics setting page. The operation of keys is
the same as in other setting pages. You need to press H and P simultaneously
to exit this mode.
Whether the voltage is eligible or not is according to whether the measured
voltage is within the limitations set by the user. The limitations of the three
phase voltages can be set respectively and the setting value is the same as the
communication value, which is the secondary value without PT and CT.
The following table shows you how to set it:
01, 02: When the meter is set to “2LL”, it is U12 and
U1 for others.
01: High limit of
U1(U12)
02: Low limit of
U1(U12)
V/A
V/A
Access code page
P
H
+