DPMS XPQ, User Manual, Page: 55 / 134

53
POWER INSTRUMENTS
07: This screen will display only when you select the “at
once”.
08: Set your time of freezing on this screen when you
select the “assign” mode.
09: There are two modes of clearance: “assign” means
clear at an assigned time, this will skip the 10th screen
to the 11th to set the time. “At once” means clear at once
after you finish the 10th screen.
10: Finish this screen when you select the “at once”
mode.
11: Execute this order every year at this date:MM:DD.
12: Execute this order every year at this time:hh:mm:ss.
13: “0”stands for fundamental based measuring, “1”
stands for all-wave based measuring.
14: “0” stands for mode 0:
“1” stands for mode 1: .
09: TOU clearance
mode selection
10: TOU clearing at
once setting
11: TOU clearance date
setting
07: Freezing at once
setting
08: Freezing time
setting
V/A
V/A
V/A
V/A
V/A
12: TOU clearance time
setting
V/A
13: Energy measuring
mode selection
14: Apparent power
measuring mode
V/A