DPMS XPQ, User Manual

Page: 42 / 134

40
DPMS XPQ User Manual
There are four keys on the front panel, labeled as H, P, E and V/A from left
to right. Use these four keys to read metering data and set the parameters.
Metering Data Reading
Normally, it displays the metering data, such as voltage, current, power etc.
There are several key patterns: press H, P, E, V/A and press key P and key V/A
simultaneously.
Press V/A to read voltage and current in the
metering area. The screen will roll to the next
display as you press V/A each time. It will go
back to the first screen if you press V/A at the
last screen.
Table on the left shows you how it scrolls:
Note: When the meter is set to “2LL”, there
is no phase voltage and neutral current display.
So only the third, fourth and fifth screens will be
displayed.
Line
Voltage & avg
Current & avg
Three phase Current
demand
Three phase
Voltage & avg
Three phase
Current & avg
V/A
V/A
V/A
V/A
V/A