Docomo FOMA P905ITV, Instruction Manual

Page: 268 / 596

266
One Seg
To watch One Seg programs, you need to execute Channel Setting and to
select a channel list in advance. You can store up to 10 channel lists.
≥
The broadcasting stations you can receive differ depending on the local area. If you
store a channel list of the area for traveling or business trip, you can watch programs in
the area just by selecting the channel list.
≥
The remote-control numbers you use with channel selections are previously set for
respective broadcasting stations.
≥
You cannot execute Channel Setting during recording a One Seg program.
The broadcasting stations you can currently watch are automatically
searched and stored in a channel list.
≥
Perform the setting with the One Seg antenna extended within the terrestrial digital TV
broadcasting service area.
1
m 1
1Seg
1
Channel setting
1
Auto channel setting
1
YES
Searching takes place.
≥
From the Channel List display or Viewer display, press
i
( ), select
“Channel setting”, and select “Auto channel setting”.
≥
One Seg is not available while “USB mode setting” is set to “microSD mode” or “MTP
mode” and the FOMA phone is connected to a personal computer.
≥
One Seg might automatically start when you end a call by closing the FOMA phone
during a call. In such a case, be careful not to use the FOMA phone close to your ear
because audio is played back at the sound volume for One Seg.
≥
The life of battery pack may shorten if you watch One Seg programs for a long time
during charging.
<Channel Setting>
Setting Channels
Auto Channel Setting
Information
2
YES
1
Enter a title.
≥
You can enter up to 11 full-pitch/22 half-pitch characters.
≥
When you press
O o
( ) without entering a title, the title name takes the
name of “YYYY/MM/DD hh:mm”. (Y: year, M: month, D: date, h: hour, m: minute)
≥
To cancel searching midway, press
l
( ) or
r
; then select “YES”. You
can store the searched broadcasting stations in a channel list.
You can store the broadcasting stations set by prefecture to a channel
list.
1 m 1
1Seg
1
Channel setting
1
Select area
1
Select an area
1
Select a prefecture
1
YES
≥
From the Channel List display or Viewer display, press
i
( ), select
“Channel setting”, and select “Select area”.
Information
≥
When the multiple broadcasting stations which have the same remote-control number
are retrieved, the message to the effect that the remote-control number is doubled
appears. Select “OK” and select your area from the Local Area Selection display. The
channels in the area you select are preferentially assigned to remote-control numbers
1 to 12, and channels in the area you do not select are assigned to remote-control
numbers 13 onward.
≥
The time to search channels requires for about 30 to 50 seconds. However, it differs
depending on the number of broadcasting stations or airwave conditions, and might
exceed 100 seconds.
Select Area
Information
≥
Depending on the area, you may not be able to correctly store the broadcasting
stations by “Select area”. In that case, search for the broadcasting stations by “Auto
channel setting”.