Docomo FOMA P905ITV, Instruction Manual

Page: 67 / 596

65
Vo
ice
/V
id
e
o
pho
ne
Cal
ls When a caller’s phone number is provided
If you store the caller ’ s name, phone number, and image in the Phonebook, the name,
phone number, and icon (or image) are displayed.
≥
If the same phone number is stored with multiple names in the Phonebook, the name
that comes first in the search order (see page 96) is displayed.
≥
The phone number but not the name is displayed during Personal Data Lock.
≥
For a forwarded call, the forwarder ’ s phone number is displayed below the caller. (It
might not be displayed in the case of some forwarders.)
≥
When you receive a call to an additional number of Multi Number, the stored name for
the additional number is displayed below the caller. (With a forwarded call, you can
press
c
( ) to switch to display of the forwarder.)
When a caller’s phone number is not provided
The reason for no caller ID is displayed. (See page 137)
<For Videophone Calls>
≥
Just after purchase, Hands-free is automatically activated during a videophone call as
“Hands-free w/ V. phone” has been set to “ON”. (See page 76) However, Hands-free
is deactivated during Manner Mode regardless of “Hands-free w/ V. phone”.
≥
Even if Call Forwarding Service is set to “Activate”, the call is not forwarded unless the
forwarding destination is a phone compatible with the videophone conforming to
3G-324M (see page 50). Check the phone you are forwarding the call to and then
activate the service. The videophone caller does not hear the guidance to the effect
that the call is forwarded. (The message to the effect that the call is to be forwarded
appears, depending on the receiver
’ s FOMA phone.)
≥
If a videophone call comes in from the phone number to be rejected by Nuisance Call
Blocking Service, the video guidance for Call Rejection is played back and the call is
disconnected.
Display for incoming calls
Function Menu while a Call is Ringing
Information
Function menu Operation/Explanation
Call rejection You can disconnect the call without answering.
Call forwarding See page 421.
Voice mail See page 417.
When you have set “Notify switchable mode” to “Indication ON”, the
caller (the other party) can switch between a voice call and videophone
call.
When the caller (the other party) switches between a voice call and
videophone call, the message telling that the call is being switched
appears, the voice guidance is played back, and then the call is switched.
≥
You (receiving end) cannot switch between a voice call and videophone call.
You can set to start talking (Any key answer) or to stop the ring tone
(Quick silent) by pressing a key besides
O o
,
d
, or
p
(for PushTalk
call) for when a call or PushTalk call comes in.
1
m
1
Settings
1
Incoming call
1
Answer setting
1
Select a key operation.
Any key answer
You can start talking by pressing any key shown below:
≥
When receiving a videophone call, you can start talking by pressing
O o
or
d
.
Switched between a Voice Call and
Videophone Call by the Other Party
+ m - 5 - 8
<Answer Setting>
Setting Response of Key Operation for
Answering Incoming Calls
Voice call
※
1
O o
,
d
,
0
through
9
,
a
,
s
,
r
,
m
,
c ※ 2
,
N o
,
?
,
<
PushTalk call
O o
,
d
,
p
,
0
through
9
,
a
,
r
,
l
,
c
,
B o
,
?
,
<