Docomo FOMA P905ITV, Instruction Manual

Page: 64 / 596

62
V
o
ice/
V
id
e
op
ho
ne Cal
ls
You can store prefix numbers such as international call access codes or
“186”/“184” and add them to the phone number for dialing. You can store
up to seven prefix numbers.
1
m 1
Settings
1
Network setting
1
Prefix setting
1
Highlight <Not recorded> and press
l
( ).
≥
If you select a stored prefix, you can check the stored contents.
≥
To delete a stored prefix, press
i
( ) and select “Delete this” or “Delete all”
then select “YES”. If you select “Delete all”, you need to enter your Terminal
Security Code.
2
Enter a name
1
Enter a prefix number.
≥
You can enter a name of up to 8 full-pitch/16 half-pitch characters.
≥
You can enter a prefix number of up to 16 digits. The keys for entry are limited to
0
through
9
,
s
and
a
.
You can add a prefix number to the beginning of phone number when
you make a call.
1
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
Delete this
1
YES
Delete all
1
Enter your Terminal Security Code
1
YES
Function menu Operation/Explanation
Information
< Delete this > < Delete all>
≥
You cannot delete the country code or international call access code set by “Auto
assist setting”.
<Prefix Setting>
Storing Numbers to be Added to the
Beginning of a Phone Number
Prefix Numbers
2
i
( )
1
Prefix numbers
1
Select a name
1
d
or
O o
( )
≥
Press
l
( ) to make a videophone call and press
p
to make a PushTalk
call.
≥
For making a PushTalk call, adding a prefix number such as “1 8 6” or “1 8 4” to the
beginning of the phone number is disabled.
You can set whether to regard the numbers after “
:
” of a phone number
as a sub-address to access the specified phones or data terminals.
≥
The sub-address is a number assigned to identify each ISDN terminal connected to an
ISDN line. It is also used for selecting contents on “V-live”.
1
m 1
Settings
1
Other settings
1
Sub-address setting
1
ON or OFF
You can set an alarm that sounds until a voice call, videophone call, or
PushTalk communication is reconnected after disconnected owing to
bad radio wave conditions.
1
m
1
Settings
1
Talk
1
Reconnect signal
1
Select an alarm.
<Sub-address Setting>
Making a Call with Specified Sub-address
Information
≥
Even if you set “Sub-address setting” to “ON”, “
:
” at the top of phone numbers and
“
:
” immediately after the prefix number or “1 8 6”/“1 8 4” are not regarded as
sub-address mark-off symbols.
+ m - 7 - 7
<Reconnect Signal>
Setting Alarm for Reconnecting