Docomo FOMA P905ITV, Instruction Manual

Page: 504 / 596

502
Ap
pe
nd
ix/
E
x
ternal
De
vic
es/
Tro
ubl
es
hoo
tin
g
Regarding data and programs downloaded or obtained from sites,
i-mode mail messages or SMS messages to the FOMA phone, you can
detect data that might cause failure, can delete it, and can stop starting
an application program.
≥
Use the pattern data for checking. Update the pattern data, because it is upgraded
each time new trouble is found. (See page 503)
≥
The scan function is for filtering out the data that causes failure to mobile phones at the
time of browsing web pages or receiving mail messages. Note that this function works
only when the pattern data for each failure has been downloaded to your mobile phone
and when the pattern data for each failure is found.
≥
The data contained in the pattern data varies depending on the mobile phone model.
Therefore, note that we may stop distributing the pattern data to mobile phones that
have been on the market for three years or more.
<Scanning Function>
Protecting FOMA Phone from Data
Causing Failure
First of all, update the pattern data to make it the latest.
If you set “Scan” to “Valid”, data or a program can be automatically
checked when you try to run it.
In addition, if you set “Message scan” to “Valid”, a received SMS
message can be automatically checked when you display it.
1
m 1
Settings
1
Lock/Security
1
Scanning function
1
Set scan
1
Select an item.
Scan . . . . . . . . . . . Sets whether to run the scanning function.
Message scan . . . Sets whether to run the scanning function when displaying an
SMS message.
≥
While “Scan” is set to “Invalid”, you cannot set “Message scan”.
2
Valid or Invalid
1
YES
≥
When the scan function is set, an alert is shown by five levels if data that might
cause failure is detected. (See page 504)
Set Scanning Function <Set Scan>
Information
≥
The scanning is not available for the SMS message which notifies you of receiving
mopera mail or of incoming calls for Voice Mail Service.