265
One Seg
<Example> When you watch a One Seg program for the first time
Store the channel list for the area you use. (See page 266)
Extend the One Seg antenna, and activate One Seg. (See page 268)
■
One Seg antenna
When you watch a One Seg program, fully extend the One Seg antenna.
≥
When you change the direction of the One Seg antenna, do not force it.
Before Using One Seg
How to Watch a One Seg Program
Channel Setting
Activating One Seg
1
2
Change the direction
of the One Seg antenna
without applying pressure.
Retract the One Seg antenna by
holding the lower part until it is held back.
Pull the One Seg
antenna out
as far as it goes.
■
Battery level
If you try to start One Seg or One Seg starts automatically by Book Program when the
battery is low, the battery alert tone sounds, and the confirmation display appears asking
whether to start it. Also, when the battery becomes low while you are watching or
recording a One Seg program, the battery alert tone sounds, and the confirmation
display appears asking whether to end One Seg. The battery alert tone sounds
regardless of the setting of “Keypad sound”.
≥
When you do nothing from the confirmation display for about one minute, One Seg
automatically terminates.
≥
While “Rec. when low battery” is set to “ON”, the confirmation display does not appear
during recording. (See page 2
8
2)
≥
If the battery level becomes low during recording and recording ends, the video
recorded up to that point is automatically saved.
≥
During Multitask, the battery alert tone sounds but the confirmation display does not
appear. Switch to the Viewer display and then operate.
■
When a call etc. comes in while you are watching or recording a One Seg program
When the events shown below occur while watching or recording a One Seg program, the
video and audio are suspended, and each function works. Recording is not suspended.
After you finish each function, you can resume watching a One Seg program. See
page 272 for receiving i-mode mail or SMS messages.
≥
Incoming voice call
≥
Incoming videophone call
≥
Incoming PushTalk call
≥
Receiving i-mode mail, SMS, Message R/F
(when “Receiving display” is set to “Alarm preferred”)
≥
Notification of Alarm, Schedule, ToDo, Book Program
(when “Alarm setting” is set to “Alarm preferred”)
≥
Notification of Timer Recording
(When the start date/time comes, the FOMA phone works according to the setting of
“Priority”.)
Information
≥
When you have not inserted the UIM, when you have canceled the contract with
DoCoMo, or when you have temporarily suspended using the FOMA service, you
cannot watch One Seg programs.
≥
Even when you have inserted the UIM contracted with DoCoMo, you might be
disabled to start One Seg if you repeatedly watch One Seg programs in the condition
the FOMA phone cannot communicate such as when you are out of the service area.
In that case, try to start One Seg in the condition the FOMA phone can communicate
such as by moving into the FOMA service area.
≥
When you watch a One Seg program for the first time, start One Seg in the FOMA
service area.
Summary of Contents for FOMA P905ITV
