Docomo FOMA P905ITV, Instruction Manual

Page: 429 / 596

427
Netwo
rk
Servi
ces
1
2in1 Setting Menu display
1
Do the following operations.
Configure 2in1 Setting
Item Operation/Explanation
Mode switching You can switch to the mode you use.
1
Select a mode.
≥
When 2in1 is activated, the display for selecting the mode
appears also by pressing and holding
<
for at least one
second with the Stand-by display shown, and entering your
Terminal Security Code.
≥
When “Mode link” is activated, the confirmation display appears
telling that the setting for “Receive avoidance set.” is also
changed.
Phonebook 2in1
setting You can change Phonebook 2in1 Setting for the Phonebook
entry stored in the FOMA phone.
1
Select an item.
Set to A . . . . . . . . . . Sets as the Phonebook entry for A. You can
use it in A Mode and Dual Mode.
Set to B . . . . . . . . . . Sets as the Phonebook entry for B. You can
use it in B Mode and Dual Mode.
Set to Common . . . Sets as the common Phonebook entry for A
and B. You can use it in all modes.
1
Select a setting method.
Set one . . . . .Sets a Phonebook entry you call up.
Set some . . . .Select multiple Phonebook entries from the
Phonebook List you call up, then press
l
( ).
Set group . . .Sets a Phonebook group you call up.
Stand-by display You can set the Stand-by display that appears in Dual Mode or B
Mode.
1
Select a mode
1
Set the Stand-by display.
≥
See page 112 for how to set the Stand-by display. However,
“
i α
ppli display” is not displayed.
≥
If you select “Release”, the setting returns to the default.
Standby disp. Wide
Set call/receive No.
(Disp. call/receive
No.) You can set the character font of phone numbers displayed on
the Dialing/Call Receiving display, detailed Dialed/Received Call
display, detailed Redial display, and detailed Sent Chaku-moji
Message display for when you make/receive calls by Number B.
1
Pattern 1 or Pattern 2
Set call/receive No.
(Ringtone set. for
No. B) You can set a ring tone for Number B and a mail ring tone for
Address B.
1
Select an item.
Phone . . . . . . . . . Sets a ring tone for voice calls.
Video-Phone . . . . Sets a ring tone for videophone calls.
Mail . . . . . . . . . . . Sets a ring tone for i-mode mail messages
and SMS messages.
1
Select a type of ring tone.
Go to step 3 on page 106.
≥
If you select “Release”, the setting returns to the default.
2in1 function OFF You can deactivate 2in1.
1
YES
Receive avoidance
set.
(Change recv.
avoid.) You can set Receive Avoidance Set. manually for number A and
number B.
1
Change recv. avoid.
1
A number or B number
1
Select an item.
Unchange . . . Does not change Receive Avoidance Set.
Receive . . . . . Receives the calls to the selected phone number.
Avoid . . . . . . . Avoids the calls to the selected phone number.
1
l
( )
≥
When “Mode link” is activated, the confirmation display appears
telling that it is necessary to deactivate it.
Receive avoidance
set.
(Check recv.
avoidance) You can check Receive Avoidance Set.
1
Check recv. avoidance
Item Operation/Explanation