Docomo FOMA P905ITV, Instruction Manual, Page: 568 / 596

35
Communication Setting by FOMA PC
Setup Software
STEP1 Install Software
Install the “FOMA PC setup software”.
See page 35 for installation.
If the older version than this “FOMA PC setup software” (version
4.0.0) is already installed, you cannot install this “FOMA PC setup
software”, so uninstall it in advance. See page 36 if the display
appears to indicate that the old-version “FOMA
データ通信設定ソフト
(FOMA data communication setup software)” is installed.
STEP2 Prepare for Setup
Prepare for setup.
Before setup, confirm that the FOMA phone is connected to your
personal computer and correctly recognized by the personal
computer. See page 4 for how to connect the FOMA USB Cable with
Charge Function 01/02 (option).
See page 33 for how to connect the Bluetooth devices.
If the FOMA phone is not correctly recognized by the personal
computer, you cannot carry out settings and communication. See
page 32 for confirming whether the FOMA phone is correctly
recognized by the personal computer.
See page 31 through page 33 for how to install the “FOMA
communication setup files” (driver).
STEP3 Setting Operation
Carry out the appropriate setting for the
communication you use.
Setting the packet communication from “Easy Setting”
When using “mopera U” or “mopera” as an access point
............................................................................................ page 37
When using a provider other than “mopera U” or “mopera”
............................................................................................ page 38
Setting the 64K data communication from “Easy Setting”
When using “mopera U” or “mopera” as an access point
............................................................................................ page 39
When using a provider other than “mopera U” or “mopera”
............................................................................................ page 40
See page 42 for setting an access point name (APN).
STEP4 Connection
Connect to the Internet.
To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication.
Using the “FOMA PC setup software”, you can easily set
up dial-up and access point name (APN).
≥
Operate as the user who has the PC administrator right.
Before installing the “FOMA PC setup software”, you
need to register the “FOMA communication setup files”
(driver) correctly on the device of the personal
computer. (See page 32)
Installing FOMA PC Setup Software
Notes for Installing FOMA PC Setup
Software
Confirm that the FOMA phone is correctly
recognized by your personal computer
■ When you connect the FOMA phone to your personal computer
for the first time
The wizard shown below starts.
To use the FOMA data communication, you need to register the FOMA
phone in your personal computer as a communication device.
See page 31 through page 33 for installation of the “FOMA
communication setup files” (driver).