Docomo FOMA P905ITV, Instruction Manual, Page: 79 / 596

77
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
You can set an image to be sent to the other party for making a
videophone call.
1
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
2 i
( )
1
Select image
1
Chara-den
1
Select a Chara-den image.
≥
To cancel the setting by call, select “Release”.
If a videophone call cannot be connected, it will be automatically redialed
as a voice call.
1
m 1
Settings
1
Videophone
1
Voice call auto redial
1
ON or OFF
Set by Call
<Voice Call Auto Redial>
Redialing as a Voice Call when a
Videophone Call cannot be Connected
Information
≥
The charges for calls once switched to voice calls are billed at the rates for the voice
calls.
≥
Voice Call Auto Redial does not work when a videophone call cannot be connected
such as when the line is busy or the other party
’ s phone is in Public Mode (Drive
Mode). However, Voice Call Auto Redial works when you make a videophone call to a
phone that does not support the videophone function.
You can let the other party know that your FOMA phone can switch
between a voice call and videophone call.
This function is set to “Indication ON” at the time of contract. When
“Notify switchable mode” is set to “Indication ON”, the caller can switch
between the videophone call and voice call.
≥
You cannot operate “Notify switchable mode” when you are out of the service area or
radio waves do not reach, or during a call.
1
m
1
Settings
1
Videophone
1
Notify switchable mode
1
Do the following operations.
1
m 1
Settings
1
Incoming call
1
V-phone while packet
1
Select an item.
V-phone priority
. . . Shows the Videophone Call Receiving display. When you answer the
videophone call, packet communication is disconnected.
Packet downld priority
. . . Rejects the videophone call and continues the communication.
V-phone answerphone
. . . Connects the incoming videophone call to the Voice Mail Service Center.
Call forwarding
. . . Forwards the incoming videophone call to the forwarding destination.
<Notify Switchable Mode>
Setting for Switching between a Voice Call
and a Videophone Call
Item Operation/Explanation
Indication ON
1
YES
1
OK
Indication OFF
1
YES
1
OK
Check indication You can check the setting of the function.
<Videophone while Packet>
Selecting Response to Incoming
Videophone Calls during i-mode