Docomo FOMA P905ITV, Instruction Manual

Page: 114 / 596

112
S
oun
d/
Sc
reen/
L
ig
ht
Set
ti
ngs
※ 2 When “Prefer manner mode” on page 379 is set to “OFF”, the tone sounds at the
volume set for Alarm.
※
3 The tone sounds at Level 1 when
①
is “Silent”.
※ 4 The tone sounds at Level 2 when ① is “Step”.
※ 5 The tone sounds at Level 1 when ① is not “Silent”.
※
6 When “Prefer manner mode” on page 27 8 is set to “OFF”, the tone sounds at the
volume set for Book Program.
※ 7 The tone does not sound when ① is “Step”.
You can select from among standard “Manner mode” to inform you of
incoming calls or mail by the vibrator, “Super silent” to erase sounds
including confirmation tones from the earpiece, or “Original” to
customize operations.
1
m
1
Settings
1
Incoming call
1
Manner mode set
1
Manner mode, Super silent or Original
1
Do the following operations.
Item Operation/Explanation
Record msg.
1
ON or OFF
≥
Even if you select “ON”, the ring time is fixed to about 13
seconds and cannot be changed when “Record message
setting” on page 71 is set to “OFF”.
≥
See page 71 for Record Message Setting.
Vibrator You can set the FOMA phone to vibrate for incoming calls and
mail.
1
ON or OFF
≥
See page 10 8 for Vibrator.
Phone vol. You can adjust the ring volume for incoming voice calls,
videophone calls and PushTalk calls.
1
Use
B o
to adjust the volume.
≥
See page 67 for Ring Volume.
Mail vol. You can adjust the ring volume for i-mode mail, SMS messages,
and Messages R/F.
1
Use
B o
to adjust the volume.
≥
See page 67 for Ring Volume.
Alarm vol.
1
Use
B o
to adjust the volume.
≥
See page 37 8 for Alarm.
2
Press
l
( ).
You can set an image for the Stand-by display. You can set also i-motion
movies shot by the FOMA phone or downloaded from sites for the
Stand-by display. You can set it for the vertical display and horizontal
display respectively.
1
m 1
Settings
1
Display
1
Display setting
1
Stand-by display or Standby disp. Wide
1
Select a type of image.
≥
If you select “Calendar”, select a display format, and then select “BG image ON”
or “BG image OFF”. If you select “BG image OFF”, the setting is completed.
For “Standby disp. Wide”, you cannot select a display format; it is displayed in “To
display 1 month”.
≥
If you select “
i α
ppli display”, select an i-
α
ppli program. The setting is completed.
You cannot select “
i α
ppli display” for “Standby disp. Wide”.
VM tone You can set the FOMA phone to sound a confirmation tone for
when a record message is played back, a voice memo is
recorded or played back, and a movie memo is recorded.
1
ON or OFF
Keypad sound
1
ON or OFF
≥
See page 109 for Keypad Sound.
Mic sensitiv.
1
Normal or Up
LVA tone
1
ON or OFF
≥
See page 43 for LVA Tone (low battery alarm).
Item Operation/Explanation
+ m - 5 - 6
<Display Setting>
Changing Displays
Set Stand-by Display