Docomo FOMA P905ITV, Instruction Manual

Page: 396 / 596

394
Ot
h
e
r Co
nve
n
ie
nt
Fu
nct
ion
s
When “Headset switch to call” is set to “Voice call” and the Stand-by
display is shown, you can press the switch on the Flat-plug Earphone/
Microphone with Switch (option) to make voice calls.
1 m 1
Settings
1
Other settings
1
Headset switch to call
1
Voice call or OFF
≥
You can check the currently set phonebook entry by pressing
l
( ).
2
Search the Phonebook
1
Select a Phonebook entry.
≥
If you have signed up for Call Waiting Service and “Multi calling” is displayed during a
call, you can switch two calls by pressing and holding the switch of the Flat-plug
Earphone/Microphone with Switch for at least one second. However, you cannot use
the switch to end the call.
≥
You can adjust the earpiece volume by pressing
. <
(raise) or
. >
(lower) during a call.
<Headset Switch to Call>
Selecting a Call Destination when
Earphone is Connected
Information
Information
≥
When the Phonebook entry contains multiple phone numbers, the first phone number
is set.
≥
If you delete the set Phonebook entry, the Phonebook entry stored in the memory
number 999 is automatically set to Headset Switch to Call.
If a call comes in while the Flat-plug Earphone/Microphone with Switch
(option) is connected, the FOMA phone automatically answers the call
after the specified ring time elapses.
1
m
1
Settings
1
Incoming call
1
Auto answer setting
1
ON or OFF
1
Enter a ring time (seconds).
≥
Enter from “001” through “120” in three digits.
≥
You cannot set the same ring time for Auto Answer Setting and Record Message
Setting. Set a different time for each.
+ m - 9 - 4
<Auto Answer Setting>
Answering a Call Automatically when
Earphone is Connected
Information
≥
When the FOMA phone automatically answers a videophone call, a substitute image
is sent to the other party. You can switch between the substitute image and the
camera image by pressing
+ m
during the videophone call. (See page 74)
≥
If you activate Voice Mail Service or Call Forwarding Service together with Auto
Answer Setting and want to give priority to Auto Answer Setting over the service, set
its ring time shorter than that for Voice Mail Service or Call Forwarding Service.
≥
Even if you connect the Flat-plug Earphone/Microphone with Switch while ringing,
Auto Answer Setting does not work. However, if you disconnect it while ringing, Auto
Answer Setting works.
≥
During 64K data communication or connecting the Flat-plug AV Output Cable
(option), Auto Answer Setting does not work.