Docomo FOMA P905ITV, Instruction Manual

Page: 376 / 596

374
Ot
h
e
r Co
nve
n
ie
nt
Fu
nct
ion
s
Multiaccess enables you to simultaneously connect to three lines; a
voice call, packet communication, and SMS.
To switch the displays, press and hold
_
for at least one second; or
press
_
to switch from TASK MENU. (See page 376)
See page 478 for details on combination of Multiaccess.
You can make a voice call without disconnecting i-mode or packet
communication.
1
During i-mode or packet communication
1
_
1
Stand-by display
The Stand-by display appears.
2
Make a call.
≥
If you make a videophone call during i-mode, i-mode is disconnected and the
videophone call is made.
After you finish the videophone call, the i-mode display returns.
<Multiaccess>
Multiaccess
Voice call Single line
i-mode, i-
α
ppli, i-mode mail, packet communication via PC Single line
SMS Single line
Information
≥
You are charged a fee for each line during Multiaccess.
Make a Voice Call during i-mode or during Packet
Communication
You can receive a voice call without disconnecting i-mode or packet
communication.
1
The Call Receiving display appears when a call comes in
1
Press
d
to answer the call.
≥
To return to the display for i-mode or packet communication without answering
the call, press and hold
_
for at least one second. Press and hold
_
for at least
one second again to return to the Call Receiving display.
The caller hears not a message but a ringing tone.
You can use i-mode, send/receive i-mode mail, etc. without
disconnecting a voice call.
1
During a voice call
1
_
1
m
( )
Select an icon to operate each function.
Receive a Voice Call during i-mode or during Packet
Communication
Use Communication during Voice Call
Information
≥
When a mail message or Message R/F comes in during a call, the ring tone does not
sound and illumination does not flicker regardless of the “Receiving display” setting.
≥
A ring tone sounds and the Receiving Result display appears when “Receiving
display” is set to “Alarm preferred” except for the following cases:
･ During a call ･ While the camera is activated
･ When an i-
α
ppli program set for the Stand-by display is running as an ordinary
i-
α
ppli program
≥
When you perform packet communication via a personal computer, make a call-out
operation from the personal computer during a voice call.