Docomo FOMA P905ITV, Instruction Manual

Page: 577 / 596

44
To manually carry out the communication setting, you
need to specify a COM port number, which is assigned
to “FOMA P905iTV” (modem) embedded after you install
the “FOMA communication setup files” (driver).
The confirmation method varies depending on the
operating system of your personal computer.
≥
When using DoCoMo Internet access service “mopera U” or
“mopera”, you do not need to set an access point name (APN);
therefore, you do not need to confirm the modem.
1
“ [ スタート (Start)]”
1
Open “ コントロー
ルパネル (Control panel)”.
2
From “
ハードウェアとサウンド
(Hardware and
sound)” in “
コントロールパネル
(Control
panel)”, open “
電話とモデムのオプション
(Phone and modem options)”.
3
If the “ 所在地情報 (Address information)”
display appears, enter “ 市外局番/エリアコード
(City code/Area code)”, then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access
point)” field of “FOMA P905iTV”, then click
“OK”.
≥
When connecting wirelessly using Bluetooth, confirm the COM
port number of the in-use Bluetooth-linked standard modem or
Bluetooth modem provided by a Bluetooth device maker in the “
接
続先
(Access point)” field.
≥
The COM port number you confirmed is used to set an access
point name (APN) (see page 44).
≥
The contents on the property display and COM port number vary
depending on the personal computer you use.
≥
Windows Vista does not support “Hyper Terminal”. For Windows
Vista, set by using a software program which supports Windows
Vista. (Follow the settings of the software program you use.)
Confirm COM Port Number
The operation below explains how to set an access
point name (APN) for packet communication. You can
register up to 10 access point names (APNs), which are
managed with cid1 to cid10.
When using “mopera U” or “mopera”, you do not need
to set the access point name (APN).
The operation below is the example where you use
“XXX.abc” as the access point name (APN) and use the
FOMA USB Cable with Charge Function 01/02 (option).
For the actual access point name (APN), contact your
Internet service provider or network administrator.
The setting here will be the access point number for
dial-up network setting (see page 44).
For packet communication, you can specify whether to
notify your caller ID (caller ID notified/not notified).
The caller ID is your important information; so, take a
great care to notify your caller ID. You can use AT
commands (
¢
DGPIR command) to specify “caller ID
notified/not notified” before dial-up connection.
1
“ [
スタート
(Start)]”
1
“
接続先
(Access point)”
1
Click “
接続またはネットワークをセットアッ
プします
(Setup the connection or network)”.
2
Select “ ダイヤルアップ接続をセットアップしま
す (Setup the dial-up connection)”, then click
“ 次へ (Next)”.
Set an Access Point Name (APN)
Set Caller ID Notified/Not Notified
Set Dial-up Network