Docomo FOMA P905ITV, Instruction Manual

Page: 104 / 596

102
Ph
one
bo
ok
You need to set “Voice earphone dial” to “ON” and open the FOMA
phone in advance.
1
Press and hold the switch of the Flat-plug Earphone/
Microphone with Switch (option) for at least one second.
2
Perform the operations in step 1 and step 2 of “Dial from
Phonebook by Voice” on page 101.
≥
You can make a call also by pressing the switch of the Flat-plug Earphone/
Microphone with Switch instead of pressing
d
or
O o
.
You can access a voice dial entry with the FOMA phone closed as well.
You need to set “Voice earphone dial” to “ON” in advance, and connect
with the Bluetooth device using the Headset service or Hands-free
service.
≥
For using the Hands-free service, the Bluetooth device needs to support a voice
recognition function.
1
Press the switch of the Bluetooth device.
≥
You can access a voice dial entry also by pressing and holding
<
for at least one
second when the FOMA phone is closed.
2
Access a voice dial entry following the voice guidance.
Once the voice is recognized as a voice dial entry, the detected result is displayed.
≥
The FOMA phone automatically dials out about two seconds after the voice
guidance informing of dialing finishes.
To access a voice dial entry using the Flat-plug Earphone/
Microphone with Switch
To access a voice dial entry using a Bluetooth device
1
m
1
Settings
1
Other settings
1
Voice settings
1
Do the following operations.
Voice Settings
Item Operation/Explanation
Auto voice dial You can automatically make a call to the phone number
accessed by voice.
1
ON or OFF
Voice earphone dial You can access the voice dial entries by using the Flat-plug
Earphone/Microphone with Switch (option) or Bluetooth Headset
F01 (option).
1
ON or OFF
Read aloud settings See page 376.
Read aloud volume See page 377.
Read aloud speed See page 377.
Read aloud output See page 377.
Read aloud valid
set. See page 377.