Docomo FOMA P905ITV, Instruction Manual

Page: 345 / 596

343
Da
ta
Di
spl
ay/
Ed
it
/M
an
age
m
ent
1 m 1
LifeKit
1
Receive Ir data
≥
You can paste the Ir data receiving function to the desktop. (See page 122)
2
Receive all
1
Enter your Terminal Security Code
1
Enter the same session number as that entered at the
sending end
1
YES
1
YES
The stored data is deleted, then receiving starts.
You can use the FOMA phone as a TV remote-controller by starting the
i-
α
ppli program.
≥
To use remote-control devices, you may need to download the software program for
those devices. [The pre-installed “
Gガイド番組表リモコン (G Guide Program List
Remote-controller)” supports the infrared remote-controller function.] The key
operation for the remote-controller differs depending on the software program.
≥
This function does not work with some devices.
≥
Communication might be affected by compatible devices and the ambient light.
≥
You cannot use the infrared remote-controller with the FOMA phone closed.
≥
You cannot use the infrared remote-controller during Self Mode.
≥
Turn the FOMA phone ’ s Infrared data port to
the front of a device to be operated. You can
operate within about 4 meters away from the
device.
≥
The radiation angle of the infrared rays is within
±15° from the center.
+ m - 7 - 9
Receive All Data Files
Information
≥
When you receive Phonebook entries in which still images are stored or mail to which
files are attached, and the multiple same still images or files are found, only one image
or file is stored.
Using Infrared Remote-controller Function
Infrared Remote-controller
Within about
4 meters
Infrared data port
Within ±15° from
the center
For when you forward Phonebook entries using infrared rays, iC
communication, SD-PIM, or DoCoMo keitai datalink, you can specify
whether to forward the stored still images together.
1
m
1
Phonebook
1
Phonebook settings
1
Forwarding image
1
ON or OFF
iC communication is the function that enables you to send/receive data
files to/from another FOMA phone using the FeliCa reader/writer
function. You can send/receive data files by overlapping the FeliCa “
”
mark of your FOMA phone with that of another FOMA phone supporting
the iC communication function.
≥
The type of files and conditions of forwarding are the same as those of infrared data
exchange. (See page 340)
However, you cannot send multiple files at a time.
≥
You cannot execute iC communication while “IC card lock” is activated.
≥
You cannot execute iC communication with the FOMA phone closed.
≥
You might have difficulty in sending or receiving files depending on the destination
FOMA phone. In that case, move a FeliCa mark “
” close to or away from the other
FeliCa mark or move each side up, down, left, or right.
+ m - 2 - 6
<Forwarding Image>
Communication Setting
<iC Transmission>
About iC Communication
Overlap one another ’ s
FeliCa mark “ ”.