Docomo FOMA P905ITV, Instruction Manual, Page: 392 / 596

390
Ot
h
e
r Co
nve
n
ie
nt
Fu
nct
ion
s
1 m 1
Settings
1
Call time/cost
1
Reset total cost&dura.
1
Enter your Terminal Security Code
1
Do the following operations.
Information
≥
When Last Call Duration exceeds “19 hours 59 minutes 59 seconds”, or Total Calls
Duration exceeds “199 hours 59 minutes 59 seconds”, “0 s” returns to re-count the
time.
≥
If you switch between the voice call and videophone call during a call, the call duration
and call cost are counted respectively for the calls. You are not charged while
“Changing” (see page 53) is displayed.
≥
The duration/charge for PushTalk, i-mode communication and packet communication
are not counted. For how to check the i-mode fee, refer to “Mobile Phone User
’ s
Guide [i-mode] FOMA version” which is supplied on your i-mode contract.
≥
The charge for Chaku-moji is not counted.
≥
The international call fee for using WORLD CALL is counted. The fees for using other
international call services are not counted.
≥
The duration for ringing and calling is not counted as call duration.
≥
If you turn off the power or remove the UIM, Last Call Duration is reset to “0 s”; and
Last Call Cost is reset to “¥
¢¢
”.
+ m - 6 - 0
<Reset Total Cost&Duration>
Resetting Total Duration/Total Cost
Item Operation/Explanation
Reset total duration You can reset Last Call Duration and Total Calls Duration to “0 s”.
1
YES
Reset total cost You can reset Last Call Cost and Total Calls to “¥0”.
1
YES
1
Enter the PIN2 code.
≥
See page 129 for PIN2 code.
You can set the call cost limit for Total Calls and can be notified when it is
exceeded. If you set “Auto reset setting” to “ON”, the call cost is reset at
midnight on the 1st of the month and “
” is deleted.
1
m
1
Settings
1
Call time/cost
1
Notice call cost
1
Enter your Terminal Security Code
1
ON or OFF
1
Enter a max cost.
≥
You can set from ¥10 through ¥100,000 in unit of ¥10.
2
Select a method to alert
1
ON or OFF
1
Enter the PIN2 code.
≥
See page 129 for PIN2 code.
“ ” appears. When “Icon + alarm” is set as a notice method and the Stand-by display
returns, the message to the effect that the call cost has exceeded the maximum cost is
displayed, and a warning tone sounds from the speakers.
You can clear “ ” displayed by Notice Call Cost.
1 m 1
Settings
1
Call time/cost
1
CLR max cost icon
1
Enter your Terminal Security Code.
<Notice Call Cost>
Setting Call Cost Limit
When Total Calls has exceeded the max cost
Clear Max Cost Icon
Information
≥
“ ” is cleared also by executing Reset Total Cost, Reset Settings, or Initialize.
≥
To be re-notified of the set limit after the maximum cost is exceeded, reset Total Calls.