!
USER MANUAL – Release 1.2 of 01/01/2010
Page 10 of 191
Version: 02/03/2010
1. GENERAL RECOMMENDATIONS
To be read before further use of the unit.
•
This manual constitutes an integral part of the product and must be kept near to the appliance for easy
and quick consultation.
•
The regulator must not be used with functions different to those described below. In particular, it cannot
be used as a safety device.
•
Before proceeding, check the limits of application.
1.1
SAFETY PRECAUTIONS
•
Check the power supply voltage is correct before connecting the device.
•
Only expose the front panel of the device to atmospheric agents: front protection with IP65 rating with rear
gasket. Only use the regulator within its working limits.
•
Warning: Disconnect any electric connections before performing any type of maintenance.
•
The device must never be opened.
•
In the case of malworking or fault, send the device back to "DIXELL s.r.l. (see address) with a precise
description of the problem.
•
Consider the maximum current applicable to each relay (see Technical Data).
•
Make sure that the probe cables, the regulator power supply cables and the load cables remain separate
and sufficiently distant from each other, without crossing each other or forming coils.
•
Install the probes in a way that they are not accessible to any users.
•
In the case of applications in particularly critical industrial environments, it may be useful to also use
network filters (our mod.
FT- PW
network filter), (our mod.
FT- IL
filter to be connected in parallel to the
inductive loads).
