!
USER MANUAL – Release 1.2 of 01/01/2010
Page 81 of 191
Version: 02/03/2010
Pushing the key it’s possible to enter the Level 1 (Pr1) parameters without typing any password.
To enter the Level 2 (Pr2) or Level 3 (Pr3) parameters the relevant password must be typed in
1
st
level parameters – No password needed
2
nd
and 3
rd
level parameters – relevant password required
Use the
UP
and
DOWN
cursors to select the family of parameters and press
ENTER
.
To modify a parameter, position the cursor on the same and use the
UP
and
DOWN
cursors and press
SET
:
•
The element starts to flash.
•
Increase or decrease the value using the
UP
and
DOWN
keys.
•
Confirm the modification by pressing the
SET
key again.
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
Press the
ESC
key several times to go back to the main screen.
