Delta DVP-PLC, Applications Manual

Page: 155 / 586

3 Basic Instructions
DVP-PLC Application Manual
3-1
3.1 Basic Instructions and Step Ladder Instructions
Basic Instructions
Execution speed (us)
Instruction
Code
Function Operands
ES SA EH
STEP Page
LD Loading in A contact X, Y, M, S, T, C 3.8 3.8 0.24 (0.56) 1~3 3-3
LDI Loading in B contact X, Y, M, S, T, C 3.88 3.88 0.24 (0.56) 1~3 3-3
AND Series connection- A contact X, Y, M, S, T, C 2.32
2.32 0.24 (0.56) 1~3
3-3
ANI Series connection- B contact X, Y, M, S, T, C 2.4 2.4 0.24 (0.56) 1~3 3-4
OR Parallel connection- A contact X, Y, M, S, T, C 2.32 2.32 0.24 (0.56) 1~3 3-4
ORI Parallel connection- B contact X, Y, M, S, T, C 2.4
2.4
0.24 (0.56) 1~3 3-5
ANB Series connection- loop blocks N/A 1.76 1.76 0.24 1~3 3-5
ORB Parallel connection- loop blocks N/A 1.76 1.76 0.24 1~3 3-6
MPS
Store the current result of the internal
PLC operations
N/A 1.68 1.68 0.24 1~3 3-6
MRD
Reads the current result of the
internal PLC operations
N/A 1.6 1.6 0.24 1 3-6
MPP
Pops (recalls and removes) the
currently stored result
N/A 1.6 1.6 0.24 1 3-6
Output instructions
Execution speed (us)
Instruction
Code
Function Operands
ES SA EH
STEP Page
OUT Output coil Y, M, S 5.04 5.04 0.24 (0.56) 1~3 3-7
SET
Latched
（
On
）
Y, M, S 3.8 3.8 0.24 (0.56) 1~3 3-7
RST Clear the contacts or the registers Y, M, S, T, C, D, E, F 7.8 7.8 0.24 (0.56) 3 3-8
Timers, Counters
Execution speed (us)
API
Instruction
Code
Function Operands
ES SA EH
STEP Page
96 TMR 16-bit timer T-K or T-D 10.6 10.6 9.6 4 3-8
97 CNT 16-bit counter C-K or C-D (16 bits) 9.7 9.7 12.8 4 3-9
97 DCNT 32-bit counter C-K or C-D (32 bits) 10.3 10.3 14.3 6 3-9
Main control instructions
Execution speed (us)
Instruction
Code
Function Operands
ES SA EH
STEP Page
MC Master control start N0 ~ N7 5.6 5.6 5.6 3 3-10
MCR Master control reset N0 ~ N7 5.7 5.7 5.7 3 3-10