Delta DVP-PLC, Applications Manual

Page: 124 / 586

2 Functions of Devices in DVP-PLC
DVP-PLC Application Manual
2-96
4. D1145: Number of special left-side extension modules (AD, DA, XA, PT, TC…); Max. 8 (available in SV only)
Function Group
Adjustable Pulse Speed Acceleration/Deceleration
Number
M1144 ~ M1149, M1154, D1030, D1031, D1144, D1154, D1155
Contents:
1. Special D and special M of Y0 adjustable pulse speed acceleration/deceleration for SA/SX/SC:
Device No. Function
M1144 Activation switch for Y0 adjustable pulse speed acceleration/deceleration
M1145 Accerlerating flag for Y0 adjustable pulse speed acceleration/deceleration
M1146 “Target frequency reached” flag for Y0 adjustable pulse speed acceleration/deceleration
M1147 “Decerlerating” flag for Y0 adjustable pulse speed acceleration/deceleration
M1148 “Function completed” flag for Y0 adjustable pulse speed acceleration/deceleration
M1149 “Counting temporarily stops” flag for Y0 adjustable pulse speed acceleration/deceleration
M1154 “Enabling deceleration” flag for Y0 adjustable pulse speed acceleration/deceleration
D1030 The lower 16 bits in the 32-bit data register for accumulative Y0 output pulses
D1031 The higher 16 bits in the 32-bit data register for accumulative Y0 output pulses
D1144 Starting No. of the register (D) for Y0 adjustable pulse speed acceleration/deceleration
D1154 Recommended value for indicated gap time of deceleration(10 ~ 32,767 ms)
D1155 Recommended value for indicated gap frequency of deceleration (-1 ~ -32,700 Hz)
2. Parameters for D1144:
Index Function
+ 0 Total number of sections (n) (max. 10)
+ 1 Currently executed section (read only)
+ 2 Start frequency of the 1
st
section (SF1)
+ 3 Gap time of the 1
st
section (GT1)
+ 4 Gap frequency of the 1
st
section (GF1)
+ 5 Target frequency of the 1
st
section (TF1)
+ 6 The lower 16 bits of the 32 bits for the target number of output pulses in the 1
st
section (SE1)
+ 7 The higher 16 bits of the 32 bits for the target number of output pulses in the 1
st
section (SE1)
+ 8 Start frequency of the 2
nd
section (SF2); Cannot be the same as TF1
+ 9 Gap time of the 2
nd
section (GT2)
+ 10 Gap frequency of the 2
nd
section (GF2)
+ 11 Target frequency of the 2
nd
section (TF2)
+ 12 The lower 16 bits of the 32 bits for the target number of output pulses in the 2
nd
section (SE2)
+ 13 The higher 16 bits of the 32 bits for the target number of output pulses in the 2
nd
section (SE2)
: :
+ n*6 + 2
Start frequency of the n
th
section (SFn); Cannot be the same as the start frequency of the n-1
th
section (TFn-1)
+ n*6 + 3 Gap time of the n
th
section (GTn)