Delta DVP-PLC, Applications Manual

Page: 154 / 586

2 Functions of Devices in DVP-PLC
DVP-PLC Application Manual
2-126
Error
code
Cause of error
Error
code
Cause of error
0D0B Improper use of operands in IST instruction C40F
PLC program and data in parameters have not
been initialized
0E01 Use of device C exceeds the range C41B
Invalid RUN/STOP instruction to extension
module
0E04 Use of register C exceeds the range C41C Points of extension module exceed the range
0E05
Improper use of operand CXXX of DCNT
instsruction
C41D
Number of extension modules exceeds the
range
0E18 BCD conversion error C41E Incorrect hardware setting for extension module
0E19 Division error (divisor = 0) C41F Failing to write data into memory
0E1A
Use of device exceeds the range (including E,
F index register modification)
C420 Read/write function card error
0E1B The index of the radical is a negative value C430 Initializing parallel interface error
0E1C Communication error of FROM/TO instruction C440 Hardware error in high-speed counter
0F04 Use of register D exceeds the range C441 Hardware error in high-speed comparator
0F05
Improper use of operand DXXX of DCNT
instruction
C442 Hardware error in MCU pulse output
0F06 Improper use of operands of SFTR instruction C443 No response from extension unit
0F07 Improper use of operands of SFTL instruction C4EE No END instruction in the program
0F08 Improper use of operands of REF instruction C4FF Invalid instruction (no such instruction existing)
0F09
Improper use of operands of WSFR, WSFL
instructions