manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 88

88

|

Dell Printer Configuration Web Tool

EAP-Identity

Specifies the EAP identity for the first authentication. 

Login Name

Specifies the login name to be used for the second authentication for EAP-Enterprise. Up 
to 33 alphanumeric characters are available. The entry can be the same string as 

EAP-Identity

.

Password, Retype Password

Specifies the password for the login name.

USB

Enable

Select this to use USB interface.

USB Port

Select this to enable the port.

PJL

PJL (Printer Job Language) is a job control language and a PJL command is data 
prepended to the top of the print jobs. Usually select this.

Print Mode

Select the printer language to use on the machine. The available options are 

Auto

, 

PostScript 3

, 

HP-GL/2

, 

PCL 6/5e

, and 

TIFF/JPEG

. Selecting 

Auto

 enables the machine to 

automatically determine and use the most suitable language to print data received from 
the host device. 

Auto Job Timeout

Configure the time that the data so far received by the machine will automatically be 
printed since data is no longer sent to the printer.

Adobe Communication Protocol

Standard

Select this when the output protocol of the print driver is in the ASCII format.

Binary

Select this when the output protocol of the print driver is in the BCP format.

TBCP

Select this when the output protocol of the print driver is in the TBCP format.

RAW

Select this when the output protocol of the print driver is in the ASCII or binary format.

The data is printed without being controlled by the Adobe communication protocol.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands