manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 174

174

|

Understanding Printer Messages

016-527

LDAP server SSL authentication error. 
Contact Dell.

016-528

Log in to the machine with the smart card, and then execute the operation again.

016-533

Check whether the clocks on the machine and Kerberos server are correctly set. Also 
check whether the summer time and the time zone are correctly set on the machine and 
Kerberos server.

016-534

Check whether the domain name and the server address have been correctly set on the 
machine. For connection to 

Windows 2003 Server

, specify the domain name in 

uppercase.

016-539

Kerberos server authentication protocol error
Contact Dell.

016-543

The specified domain was deleted from your authentication management software.
Select 

Refresh

 on the 

Domain

 screen, and update the domain information, or add the 

domain to your authentication management software.

016-545

Adjust the times of the computer of Active Directory and the computer on which your 
authentication management software is installed. Also, if the 

Windows

 Time Service of the 

computer on which the software is installed has stopped, start the service.

NOTE:

•

For more information on the process, refer to the manual for your authentication 
management software.

016-546

A Local User tried to obtain the information of another user.
Contact Dell.

016-548

Register the machine in your authentication management software.

NOTE:

•

For more information on the process, refer to the manual for your authentication 
management software.

016-553

You must upgrade your authentication management software.

016-554

Correctly set the login name and password used for domain user authentication of your 
authentication management software.

016-555

Check whether you can connect from your authentication management software to the 
database or Active Directory.

NOTE:

•

For more information on the process, refer to the manual for your authentication 
management software.

016-556

Because the service is overloaded, wait for a while and try the same operation again. If the 
error still is not resolved, check your authentication management software.

NOTE:

•

For more information on the process, refer to the manual for your authentication 
management software.

016-557

Check your authentication management software.

NOTE:

•

For more information on the process, refer to the manual for your authentication 
management software.

016-559

A remote download parameter error occurred. 
Confirm the settings for essential system data.

016-560

Check whether the network cable is connected, and confirm the settings of your 
authentication management software. Also, print a Configuration Report, and if the DNS 
address of the server is set to "Server Name / IP Address" for "Authentication Agent", check 
whether DNS is enabled.

016-562

Correct the guest database entries of Active Directory so that they do not contain the 
same smart card information.

Status Code

Cause and Remedy

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands