Dell S3840cdn User Manual Download Page 125

Page: 125 / 446

Dell Printer Configuration Web Tool

125

Prints with the higher speed than the Normal mode, but the quality is less.

•

High Quality

For documents with small characters or thin lines, or documents printed using a
dot-matrix printer.

Layout

Specifies the output layout.

•

Auto Reduce/Enlarge

Prints the document in the layout specified by the printer.

•

Booklet Creation

Prints on both sides of a sheet of paper bound by the edge.

•

2 Pages per Sheet

Prints two pages on one side of a sheet of paper.

•

4 Pages per Sheet

Prints four pages on one side of a sheet of paper.

•

100%

Prints in the same size as the document.

Password

Specifies the password to print a PDF file secured with a password to open the PDF file.

TIFF/JPEG Settings

Use the

TIFF/JPEG

menu to change printer settings that only affect the TIFF/JPEG jobs.

Paper Size

Specifies the paper size.

Logs

Audit Log

Allows you to enable the

Audit Log

feature which logs the operations on the printer, and

retrieve the audit log.

Device Log

The

Device Log

feature always logs the debug log and report information.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Search results

Summary of Contents for S3840cdn

Reviews:

Brands by name

Popular brands

Dell S3840cdn, User Manual

Search results

Summary of Contents for S3840cdn

Reviews:

Brands by name

Popular brands