manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 217

Maintaining Your Printer

|

217

It is recommended to use Dell toner cartridges for your printer. Dell does not provide 
warranty coverage for problems caused by using accessories, parts, or components not 
supplied by Dell.

WARNING:
• Never throw a toner cartridge into an open flame. Remaining toner in the cartridge may catch fire 

and cause burn injuries or explosion.

• Never use a vacuum cleaner for spilled toner and residual toner in this product, toner cartridge or 

toner container. It may catch fire by electric sparks inside a vacuum cleaner and cause explosion. 
Use a broom or a wet cloth to wipe off the spills. If you spill a large volume of toner, contact Dell.

• Do not shake the used toner cartridge. This may cause toner spills.

Removing the Toner Cartridge

NOTE:

•

Ensure that you remove all the paper from the bypass tray and close the bypass tray cover before 
removing the toner cartridge.

1

Grasp the grips on both sides of the front cover, and then pull it down to open.

2

Grasp the handle on the toner cartridge that you want to replace, and then pull it out.

WARNING:
• Do not shake the toner cartridge as it may cause toner spills.
• Never throw a toner cartridge into an open flame. Remaining toner in the cartridge may catch fire 

and cause burn injuries or explosion.

NOTE:

•

Slide out the toner cartridge gently. Otherwise, toner may spill from the cartridge.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands