manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 218

218

|

Maintaining Your Printer

Installing a Toner Cartridge

1

Unpack a new toner cartridge of the desired color.

2

Shake the new toner cartridge five or six times to distribute the toner evenly.

3

Insert the toner cartridge into the associated cartridge slot, and then push until it 
clicks into place.

4

Close the front cover.

NOTE:

•

If the front cover is not closed completely, a message appears and the machine will remain 
paused.

Replacing the Drum Cartridges

You need to replace all drum cartridges (yellow, magenta, cyan, and black) at a time.

WARNING:
• Before performing any of the following procedures, read and follow the safety instructions in the 

Important Information

.

CAUTION:
• Protect the drum cartridge against bright light. If the front side cover remains open for more than 

3 minutes, print quality may deteriorate.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands