manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 177

Understanding Printer Messages

|

177

016-758

No permission to use the service.
Contact your system administrator.

016-759

The number of pages reached the maximum number of pages for this service.
Contact your system administrator.

016-760

•

Enable 

High Speed Image Processing

. See the help of the print driver.

•

Increase PostScript memory.

016-761

Enable 

High Speed Image Processing

. See the help of the print driver. If the error is not 

resolved, set 

Print Page Mode

 to 

On

.

016-762

Specify correct printer language.

016-772

Set the DNS server address.

016-792

The specified job history does not exist. Try the same operation.

016-798

Unable to print a document due to insufficient storage space.
Contact customer support if this failure is repeated.

016-799

Check the parameter of the print data of the application and the Print Setup settings, and 
try printing again.

016-910

The paper requested by the selected print settings are not installed.

Install the paper or replace the paper.

016-911

Cancel the job.

Install the paper or replace the paper.

016-917

The toner cartridge (yellow) is empty. Replace the toner cartridge with a new one.

016-918

The toner cartridge (magenta) is empty. Replace the toner cartridge with a new one.

016-919

The toner cartridge (cyan) is empty. Replace the toner cartridge with a new one.

016-920

The paper specified for printing cannot be detected.

Change the settings. Or, replace the tray.

016-940

Different size settings for side 1 and side 2 were detected after the job had started with 
duplex printing specified.

Change the settings, and try again.

016-941

Mixed size/direction set for the page with images was detected after the job had started 
with Booklet specified.

Change the settings, and try again.

016-942

Different size settings for side 1 and side 2 were detected after the pages with duplex 
printing specified had been deleted.

Change the settings, and try again.

016-943

Different size settings for side 1 and side 2 were detected after the document and 
separators had been inserted for the pages with duplex printing specified.

Change the settings, and try again.

016-944

The document collate setting for the pages including the cover with images or the 
document with separators with Document Attachment specified was detected.

Change the settings, and try again.

016-945

The documents that do not support 2-Sided Print has been inserted for the pages for 
duplex printing.

Change the settings, and try again.

016-946

A document or separator has been inserted between Cover pages or Separator pages.

Change the settings, and try again.

016-948

The covers with images, separators, or blank pages were detected after the job had started 
with Booklet specified.

Change the settings, and try again.

Status Code

Cause and Remedy

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands