![Dell S3840cdn User Manual Download Page 117](http://html.mh-extra.com/html/dell/s3840cdn/s3840cdn_user-manual_84805117.webp)
Dell Printer Configuration Web Tool
|
117
Smart Card
Select from
Off
and
On - PKI Only
.
Select
On - PKI Only
to use smart cards only for the security feature, not for
authentication or job control.
Smart Card Certificate Verification
Set whether or not to verify the smart card certificate when a user uses the smart card.
When this setting is enabled, the owner of the smart card is verified not only by PIN code
verification but by certification verification of the smart card and private key match. In this
case, the upper level CA certificate of the smart card certification must be registered on
the machine.
When this setting is disabled, the owner of the smart card is verified by PIN code
verification.
Network Security
FIPS 140-2
Select whether or not to enable FIPS140 validation mode.
NOTE:
•
Although the following features work with the FIPS140 validation mode, using them is not
recommended because they use encryption algorithms which do not comply with FIPS140.
- SMB (Scan To/SMB authentication) (using DES and MD4 used in SMB authentication
(NTLMv2/NTLMv1/LM))
- LDAP Authentication (using DES and MD4 used in NTLM authentication selected by the
automatic selection "SASL-Bind (NTLM)
J
Simple-Bind")
- SMTP Authentication (using DES and MD4 used in NTLM authentication selected by the
automatic selection "NTLM
J
CRAM-MD5
J
LOGIN
J
PLAIN")
- HTTP Authentication for External Access (using DES and MD4 used in NTLM authentication
selected by the automatic selection "NTLM
J
Digest
J
Basic authentication")
- PDF Direct Print (using RC4 required in decrypting a PDF document encrypted with a
password (RC4))
OCSP
Send Query to Responder With
Select how to access an OCSP
responder from
URL as Specified in
Certificate
or
URL as Specified by
Administrator
.
Responder URL
Enter the URL of an OCSP responder
when
URL as Specified by
Administrator
has been selected for
Send Query to Responder With
. Up to
255 characters are allowed.
Communication Timeout
Specify a time-out value for OCSP
communication from 5 to 60 seconds
in 1 second increments.
CRL Retrieval
Auto Retrieval of CRL
Select whether or not to automatically
retrieve a CRL.
Communication Timeout
Specify a time-out value to retrieve a
CRL from 5 to 60 seconds in 1 second
increments.
Summary of Contents for S3840cdn
