manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 227

Maintaining Your Printer

|

227

Cleaning the Touch Screen

1

Wipe only the LCD area with a soft cloth moistened with neutral detergent or alcohol.

NOTE:

•

When you moisten the cloth with neutral detergent or alcohol, do not allow the excess liquid 
to drip down from the cloth. If the cloth is moistened with the excess liquid, wring the cloth 
gently before wiping the LCD area.

•

Do not use any volatile liquids on the machine such as benzene and paint thinner, or insect 
repellent as these may discolor, deform, or crack the machine exterior. 

•

Cleaning the touch screen with an excessive force may cause the screen to be damaged. Wipe 
the screen gently.

Cleaning Inside the Printer

Cleaning the CTD Sensor

Clean the Color Toner Density (CTD) sensor only when an alert for the CTD sensor is 
shown on the touch panel screen. See "Understanding Printer Messages".

1

Ensure that the printer is turned off.

2

Push down the latch to open the rear cover.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands