Dell S3840cdn, User Manual

Page: 200 / 446

200
| Understanding Printer Messages
116-391
116-392
116-393
116-394
116-395
116-396
116-397
116-399
An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
116-701 Memory space is insufficient. Remove unnecessary data to make space.
116-702 A print job was processed using a substitute font.
Check the print data.
116-703 Check the print data, or increase the value for
PostScript Memory
.
116-710 The correct document size could not be judged because the receive data exceeded the
HP-GL/2 spool size.
Increase the size assigned to HP-GL/2 auto layout memory.
116-713 The data has been divided into several jobs because of insufficient data storage space.
Delete unnecessary data from the data storage space.
116-714 An HP-GL/2 command error occurred.
Check the print data.
116-719 Cancel XPIF parameters not supported by the printer.
116-720 An error occurred during print processing because of insufficient memory.
Stop unnecessary ports or delete unnecessary data to free up the data storage space.
116-721 Check the time permitted for the operation for you, and try again, or consult your system
administrator to change your authorization.
116-722
116-723
116-724
Consult your system administrator to change your authorization.
116-725 Try the same operation. Contact customer support if this failure is repeated.
116-726
116-727
116-728
Consult your system administrator to change your authorization.
116-738 Match the size and orientation of the paper with the form specified, and print again.
116-739 The form or logo data cannot be registered because memory for the form and logo data
or memory capacity is insufficient.
Delete unnecessary data, or free up the space for the form memory.
116-740 A numerical value operation error occurred because a value exceeding the value limit of
the machine was used in the print data.
Check the print data.
116-741 The form cannot be registered because the number of the form registration exceeds the
maximum number allowed.
The maximum number allowed is 2048.
116-742 The logo data cannot be registered because the number of the logo data registration
exceeds the maximum number allowed.
Delete unnecessary logo data.
116-743 The logo data or form cannot be registered because the memory for the form and logo
data is insufficient.
Increase memory.
116-746 The form specified is not registered.
Status Code Cause and Remedy