manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 192

192

|

Understanding Printer Messages

029-710

Wi-Fi error. An error occurred when the printer obtains a proxy auto-config (PAC) file. The 
file was not found. Check with your network administrator to see if the URL of the PAC file 
is registered in the DHCP server. 
Contact customer support if this failure is repeated.

029-711

Ethernet 1 error. The proxy auto-config (PAC) file is invalid. 
Ask your network administrator to see if the format is appropriate for JavaScript, and if the 
file size is 64 KB or less.
Contact customer support if this failure is repeated.

029-712

Ethernet 1 error. A timeout error occurred when the printer obtains a proxy auto-config 
(PAC) file. Check and correct the following:

•

LAN cable connection

•

Default gateway configuration

•

Subnet mask configuration

•

DNS server address configuration

If the failure persists, the network or the HTTP server may have a problem. Consult your 
network administrator.
Contact customer support if this failure is repeated.

029-713

Ethernet 1 error. A connection error occurred when the printer obtains a proxy 
auto-config (PAC) file. Check and correct the following:

•

LAN cable connection

•

Default gateway configuration

•

Subnet mask configuration

•

DNS server address configuration

If the failure persists, the network or the HTTP server may have a problem. Consult your 
network administrator.
Contact customer support if this failure is repeated.

029-714

Ethernet 1 error. An error occurred when the printer obtains a proxy auto-config (PAC) file. 
When 

Setup

 in 

Enable Proxy Server

 is set to 

Manual

, check the location setting. When 

Setup

 in 

Enable Proxy Server

 is set to 

Configuration Script

, the location setting on the 

DHCP server may have a problem. Consult your network administrator.
If the location setting is correct, check on the HTTP server to see if the PAC file exists.
Contact customer support if this failure is repeated.

029-715

Ethernet 1 error. The proxy auto-config (PAC) file is invalid. When 

Setup

 in 

Enable Proxy 

Server

 is set to 

Manual

, check the location setting. When 

Setup

 in 

Enable Proxy Server

 is 

set to 

Configuration Script

, the location setting on the DHCP server may have a problem. 

Consult your network administrator.
Contact customer support if this failure is repeated.

029-716

Ethernet 1 error. A timeout error occurred when the printer obtains a proxy auto-config 
(PAC) file. Check and correct the following:

•

LAN cable connection

•

Default gateway configuration

•

Subnet mask configuration

If the failure persists, the network or the DHCP server may have a problem. Consult your 
network administrator.
Contact customer support if this failure is repeated.

029-717

Ethernet 1 error. An error occurred when the printer obtains a proxy auto-config (PAC) file. 
The file was not found. The PAC file location setting on the DHCP server may have a 
problem. Consult your network administrator.
Contact customer support if this failure is repeated.

029-718

A timeout error occurred when the printer attempts to access the server for the 

App 

Platform

 service. Check the network connection status. Wait for a while, and try the same 

operation.

029-719

App Platform

 service error. The data does not exist on the server, or the printer could not 

access the server. Check the settings on the server. 

Status Code

Cause and Remedy

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands