manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 236

236

|

Maintaining Your Printer

10

Turn the waste toner box lock lever 90-degrees clockwise to lock the waste toner 
box.

11

Close the right side cover.

Moving the Printer

WARNING:
• Two people are required to move the printer.
• To prevent you from dropping the printer and getting backache or injuries, lift the printer by 

firmly gripping the recessed areas on both sides of the printer. Never lift the printer by gripping 
any other areas.

• If the optional 550-sheet feeder has been installed, uninstall the optional 550-sheet feeder 

before moving the printer. If the optional 550-sheet feeder is not fixed securely to the printer, it 
may fall to the ground and cause injuries.

1

Turn off the printer and disconnect the power cable, interface cable, and any other 
cables.

NOTE:

•

The data in the memory are cleared when the printer is turned off.

2

Remove any paper in the output tray and retract the output tray extension.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands