manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 191

Understanding Printer Messages

|

191

028-910

Replace the fusing unit.

028-986

The paper size specified for the job does not match the size of paper loaded in the tray. 
Load the correct size of paper in the tray, and then try the same operation.

028-987

The paper specified for printing cannot be detected.

Change the settings.

029-700

•

Check the WebDAV server is working correctly.

•

Check if the destination WebDAV server is accessible from a computer.

029-701

•

Check if the destination WebDAV server is accessible from a computer.

•

Check the server settings.

Contact customer support if this failure is repeated.

029-702

Try the same operation. Contact customer support if this failure is repeated.

029-704

Wi-Fi error. The format of the proxy auto-config (PAC) file is invalid. 
Ask your network administrator to see if the format is available for JavaScript, and if the file 
size is 64 KB or less.
Contact customer support if this failure is repeated.   

029-705

Wi-Fi error. A timeout error occurred when the printer obtains a proxy auto-config (PAC) 
file. Check and correct the following:  

•

LAN cable connection

•

Default gateway configuration

•

Subnet mask configuration

•

DNS server address configuration

If the failure persists, the network or the HTTP server may have a problem. Consult your 
network administrator.
Contact customer support if this failure is repeated.

029-706

Wi-Fi error. A connection error occurred when he printer obtains a proxy auto-config 
(PAC) file. Check and correct the following:

•

LAN cable connection

•

Default gateway configuration

•

Subnet mask configuration

•

DNS server address configuration

If the failure persists, the network or the HTTP server may have a problem. Consult your 
network administrator.
Contact customer support if this failure is repeated.

029-707

Wi-Fi error. An error occurred when the printer obtains a proxy auto-config (PAC) file. The 
file was not found. When 

Setup

 in 

Enable Proxy Server

 is set to 

Manual

, check the file 

location setting. When 

Setup

 in 

Enable Proxy Server

 is set to 

Configuration Script

, the file 

location setting on the DHCP server may have a problem. Consult your network 
administrator.
If the file location setting is correct, check on the HTTP server to see if the PAC file exists.
Contact customer support if this failure is repeated.

029-708

Wi-Fi error. The proxy auto-config (PAC) file is invalid. When 

Setup

 in 

Enable Proxy Server

 

is set to 

Manual

, check the file location setting. When 

Setup

 in 

Enable Proxy Server

 is set 

to 

Configuration Script

, the file location setting on the DHCP server may have a problem. 

Consult your network administrator.
Contact customer support if this failure is repeated.

029-709

Wi-Fi error. A timeout error occurred when the printer obtains the URL of a proxy 
auto-config (PAC) file. Check and correct the following:

•

LAN cable connection

•

Default gateway configuration

•

Subnet mask configuration

If the failure persists, the network or the DHCP server may have a problem. Consult your 
network administrator.
Contact customer support if this failure is repeated.

Status Code

Cause and Remedy

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands