manualshive.com logo in svg

Dell S3840cdn, User Manual

Share
Download
Dell S3840cdn User Manual Download Page 269

Print Quality Problems

|

269

Fog (background)

NOTE:

•

This can occur on glossy or coarse media. Before checking anything else, try adjusting the 2nd Belt 
Transfer Roller (2nd BTR) to eliminate or minimize background.

Bead-Carry-Out (BCO)

Action

Yes

No

1

If you are using non-Dell brand toner cartridges, enable 
the Non-Dell Toner option.

If the fog is occurring in only one color and that color 
has a Non-Dell toner cartridge installed, try changing 
the toner cartridge to a Dell branded toner cartridge 
and make enough prints to purge the toner.

Does this solve your problem?

The task is complete. Go to action 2.

2

Replace the drum cartridges.

Does this solve your problem?

The task is complete. Contact Dell.

Action

Yes

No

1

If the printer is installed in a high altitude location, set 
the altitude of the location using 

Device

 > 

Support

 > 

Altitude Adjustment

.

Does this solve your problem?

The task is complete. Go to action 2.

2

Replace the drum cartridges.

Does this solve your problem?

The task is complete. Contact Dell.

Summary of Contents for S3840cdn































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands