manualshive.com logo in svg

Dell PowerConnect W-Airwave, User Manual

The Dell PowerConnect W-Airwave is a powerful networking product designed to enhance connectivity and streamline network management. Ensure seamless setup and optimal performance by downloading the user manual for free from manualshive.com to access detailed instructions and maximize the potential of your device.

Share
Download
background image

300

  |  Setting Up Dell PowerConnect W-Instant in AirWave

Dell PowerConnect W-AirWave 7.4

  | User Guide

APs/Devices > Monitor > Radio Statistics 
The Radio Statistics page for Dell PowerConnect W-Instant devices displays CPU Utilization, Channel 
Utilization, Bandwidth, Power, and MAC/Phy Error statistics. 

RAPIDS

Since Dell PowerConnect W-Instant does not support mitigation or high-level rogue reporting, it does not 
synchronize classification. All rogue devices are reported and stored in the AMP for evaluation based on high-level 
rule sets.

Dell PowerConnect W-Instant currently does not match wireless BSSIDs to local MAC addresses within an IAP's 
ARP table. Dell PowerConnect W-Instant does not currently support IDS event notification.

Reports

Dell PowerConnect W-Instant Virtual Controllers appear as a separate device in the Device Inventory Report and 
most other reports that list devices.

Other Available Features

Firmware Image Management

AMP pushes firmware to the Dell PowerConnect W-Instant Virtual Controller, and the Virtual Controller pushes 
the firmware to the rest of its IAPs. When using AMP to manage IAPs, you can upgrade the firmware by loading 
the firmware onto AMP and then scheduling an upgrade from AMP.

Intrusion Detection System

AMP automatically detects rogue IAPs irrespective of their location in the network. It prevents authorized IAPs 
from being detected as rogue IAPs, and tracks and correlates the IDS events to provide a comprehensive picture 
of your network's security.

Known Issues of Dell PowerConnect W-Instant Integration with 

AirWave

If the Organization String configured on the Dell PowerConnect W-Instant device is different than what is 
statically written in the template, AMP will overwrite the configured Organization String to match the template.  

NOTE: AMP does not provide a Device Uptime report for Dell PowerConnect W-Instant devices.

Summary of Contents for PowerConnect W-Airwave























































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W-Airwave

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
LORD AP5103 Series Technical Manual preview
AP5103 Series
Brand: LORD Pages: 9
Dahua NVR2104-S2 Quick Start Manual preview
NVR2104-S2
Brand: Dahua Pages: 6
Dantel 46020-38 Installation & Operation Manual preview
46020-38
Brand: Dantel Pages: 62
Lanner NCA-1040 User Manual preview
NCA-1040
Brand: Lanner Pages: 59
Intel BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX Product Manual preview
BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX
Brand: Intel Pages: 86
ANTAIRA LMP-1202M-SFP Series Quick Installation Manual preview
LMP-1202M-SFP Series
Brand: ANTAIRA Pages: 2
Xyclop XC-16CH-NVR-4TB Quick Start Manual preview
XC-16CH-NVR-4TB
Brand: Xyclop Pages: 19
Patton electronics 593/45 User Manual preview
593/45
Brand: Patton electronics Pages: 8
LevelOne WBA-4000 User Manual preview
WBA-4000
Brand: LevelOne Pages: 49
Cooler Master Masterliquid ML240L RGB Manual preview
Masterliquid ML240L RGB
Brand: Cooler Master Pages: 18
ExtraHop EDA 4200 Install preview
EDA 4200
Brand: ExtraHop Pages: 2
Lantronix N-FXE 02B Series User Manual preview
N-FXE 02B Series
Brand: Lantronix Pages: 10
NetComm NB3300 Installation And Setup preview
NB3300
Brand: NetComm Pages: 4
Mod Duo X User Manual preview
Duo X
Brand: Mod Pages: 11
HighPoint SSD7202 Quick Installation Manual preview
SSD7202
Brand: HighPoint Pages: 12
ZALMAN CNPS2005-Plus User Manual preview
CNPS2005-Plus
Brand: ZALMAN Pages: 6
Adaptec 2025ZCR - SCSI RAID Storage Controller Datasheet preview
2025ZCR - SCSI RAID Storage Controller
Brand: Adaptec Pages: 2

Brands by name

Popular brands

Load more brands