276
| Using VisualRF
Dell PowerConnect W-AirWave 7.4
| User Guide
Figure 213
Location History Player
Checking Signal Strength to Client Location
1. On a Floor Plan, locate the Signal Cutoff menu.
2. Select the desired signal level to display, as shown in
Figure 214
. The heatmap updates immediately.
Figure 214
Signal Cutoff dBm Dropdown Menu
Viewing an AP’s Wireless RF Environment
To view an access point's RF environment from APs/Devices > Monitor page:
1. Select a device of interest from APs/Devices > List, or any other AMP page that lists your APs. The APs/
Devices > Monitor page opens.
2. Click on the QuickView thumbnail showing the location of the AP, shown on the right side of
Figure 215
:
Figure 215
QuickView Thumbnail in APs/Devices > Monitor page for an AP
A fully interactive QuickView display opens below the thumbnail on the same page (not in a new window), as
shown in
Figure 216
:
Summary of Contents for PowerConnect W-Airwave
Page 1: ...Dell PowerConnect W AirWave 7 4 User Guide ...
Page 106: ...106 Configuring and Using Device Groups in AirWave Dell PowerConnect W AirWave 7 4 User Guide ...
Page 256: ...256 Creating Running and Emailing Reports Dell PowerConnect W AirWave 7 4 User Guide ...
Page 310: ...310 Index Dell PowerConnect W AirWave 7 4 User Guide ...
