manualshive.com logo in svg

Dell PowerConnect W-Airwave, User Manual

The Dell PowerConnect W-Airwave is a powerful networking product designed to enhance connectivity and streamline network management. Ensure seamless setup and optimal performance by downloading the user manual for free from manualshive.com to access detailed instructions and maximize the potential of your device.

Share
Download
background image

238

  |  Creating, Running, and Emailing Reports

Dell PowerConnect W-AirWave 7.4

  | User Guide

You can use this report as the central starting point to improve uptime by multiple criteria. This report covers 
protocol-oriented, device-oriented, or SSID-oriented information. This report can help to monitor and optimize 
the network in multiple ways. It can demonstrate service parameters, can establish locations that have superior or 
problematic uptime availability, and can help with additional analysis in multiple ways. Locations, device groups, 
or other groupings within a network can be identified as needing attention or can be proven to have superior 
performance when using this report.

As of AirWave 7.4, the Device Uptime Report contains four new columns that track bootstrap count (number of 
times the device has gone down for a firmware change), reboot count, downtime duration, and downtime 
duration percent. As mentioned above, you can optionally ignore device downtime during planned maintenance 
periods in this report, and you can restrict the report to business days only. 

Figure 170

 and 

Table 131

 illustrate and describe the Device Uptime report.

Figure 170  

Device Uptime Report Illustration

Table 132  

Reports > Generated > Device Uptime Report Unique Fields and Descriptions

Field

Description

SNMP Uptime

Displays the percentage of time the device was reachable via ICMP. AirWave polls the device via
SNMP at the rate specified on the Groups > Basic page.

ICMP Uptime

Displays the percentage of time the device was reachable via ICMP. If the device is reachable via
SNMP it is assumed to be reachable via ICMP. AirWave only pings the device if SNMP fails and then it
pings at the SNMP polling interval rate.

Time Since Last Boot

The uptime as reported by the device at the end of the time period covered by the report.

Summary of Contents for PowerConnect W-Airwave























































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W-Airwave

Panasonic BL-C20 Troubleshooting Manual preview
BL-C20
Brand: Panasonic Pages: 18
Sun Microsystems Ray 3 Plus Client Getting Started Manual preview
Ray 3 Plus Client
Brand: Sun Microsystems Pages: 6
Lanner NCA-2510 Installation Manual preview
NCA-2510
Brand: Lanner Pages: 2
Datasheen D902AC User Manual preview
D902AC
Brand: Datasheen Pages: 25
FOR-A MFR-4000 Operation Manual preview
MFR-4000
Brand: FOR-A Pages: 72
NXP Semiconductors TWR-SB0410-36EVB User Manual preview
TWR-SB0410-36EVB
Brand: NXP Semiconductors Pages: 26
4G Systems XSBox MOVE Quick Start Manual preview
XSBox MOVE
Brand: 4G Systems Pages: 2
Cisco MERAKI MX450 Installation Manual preview
MX450
Brand: Cisco MERAKI Pages: 4
JETWAY I848ASR1A User Manual preview
I848ASR1A
Brand: JETWAY Pages: 47
ETAS XETK-S22.0 User Manual preview
XETK-S22.0
Brand: ETAS Pages: 84
Comtrend Corporation WAP-5922MP Quick Install Manual preview
WAP-5922MP
Brand: Comtrend Corporation Pages: 4
Linksys PLK300 Quick Installation Manual preview
PLK300
Brand: Linksys Pages: 6
MaxComm M-150 Manual preview
M-150
Brand: MaxComm Pages: 10
ZALMAN ZM80C-HP Manual preview
ZM80C-HP
Brand: ZALMAN Pages: 18
Allied Telesis AT-AR3050S Installation Manual preview
AT-AR3050S
Brand: Allied Telesis Pages: 80
Corsair H80i v2 Quick Start Manual preview
H80i v2
Brand: Corsair Pages: 12
Conel LR77 v2 SL User Manual preview
LR77 v2 SL
Brand: Conel Pages: 32
ADS Technologies PTV-370 Driver Manual preview
PTV-370
Brand: ADS Technologies Pages: 1

Brands by name

Popular brands

Load more brands